By controlling the temperature in the reflux condenser and its required cooling, you can easily achieve high strength and purity of drinks, as well as give them a great taste and aroma. Convenient in operation and storage design of the device. Availability of a safety valve. Alembic with 1.5 mm thick induction stamped bottom, 1 mm walls and 1.2 mm top.
Easy and safe assembly and disassembly of the device. Metal stamping complies with the European standard ISO 9001. The stamping bottom avoids deformation when heated, which makes it possible to use the container on all heating surfaces: gas, electric stove and induction! I would like to draw your attention to the fact that at the initial stage we used a fillet weld for welding tanks.As it turned out in practice, such a seam had a significant drawback - uncooked cavities remained inside the container, in which the remains of the mash accumulated over time, giving the container an unaesthetic appearance. The new stamped container has end welds, which are made with blowing in compliance with all European technologies. This welding technology eliminates small gaps in the welds. Another disadvantage of the fillet weld is that it works only for bending, while the end weld works for tearing, thus significantly increasing the strength of the container itself.
The end seam technology is used in autoclaves, where heating takes place at a pressure above atmospheric pressure. Due to the presence in the design of flanges with twists made of heat-resistant material and a silicone gasket, you can easily assemble the column and tank yourself without losing tightness. You will no longer need wrenches and other tools and fixtures. The flange secures the tank lid perfectly.
A 3 mm thick silicone gasket contributes to maximum sealing, and also prevents the penetration of specific "aromas" into the room. Filling the mash into a container and draining the remains with a wide mouth and a drain tap is much easier than using a funnel, which greatly speeds up and simplifies the process. The cleaning process after using the device has also become much easier. The safety valve of the model prevents the apparatus from excessive internal pressure.
What is important - high-quality distillers must necessarily have a protective valve in their design. The ferromagnetic bottom in the design allows the device to be operated on any type of plates. The presence of a temperature controller in the tank will help you orient yourself in time and turn on the cooling water, as well as complete the distillation process in time. Temperature control in the column will help to control the alcohol strength at the outlet - the boiling point of alcohol is 78.3 C, which is recommended to be observed in the column. Digital thermometers TR-101 provide the most accurate measurement with an accuracy of 0.1°C.In addition, the durability of operation is guaranteed by the use of stainless steel as the main material. So corrosion and deformation of the device is not terrible! The fast, easy, and secure way to pay online. USA 2 - 6 weeks. UK and Germany 1 - 3 weeks. This item is in the category "Home & Garden\Kitchen, Dining & Bar\Brewing, Distilling & Wine Making\Equipment".
The seller is "perfectproduct9587" and is located in this country: UA. This item can be shipped worldwide.